Insulation for Lee and Hither Green terraces
The terraces of Lee, Hither Green and Ladywell were built with solid brick walls, open fires and no insulation at all. Putting some in is done a part at a time: the loft first, then the walls and floors as rooms are refitted. This guide covers what the shop lists for each part, and how much to order.
Greenwich Builders Merchants is the Greenwich delivery site of Discount Builders Merchants (KENT) LTD, the builders' merchant at Lower Road, Northfleet, DA11 9BB. There is one yard, and orders are placed on www.discountbm.co.uk.

The loft comes first
Current guidance for a loft is 270 mm of mineral wool: 100 mm laid between the joists and 170 mm rolled across them. The rolls are listed at 100, 150, 170 and 200 mm, and each name gives its coverage: 12.12 square metres for the 100 mm roll and 6.73 for the 170 mm. Measure the loft floor, divide by the coverage and round up. Where there is already 100 mm between the joists, only the top layer is needed.
Do not squash the wool under boards, and do not push it tight into the eaves, where air needs to pass.
Solid walls, lined on the inside
A solid wall has no cavity to fill, so it is insulated on the room side. Insulated plasterboard does it in one layer. The lists have Thermal Board, a polystyrene insulated plasterboard, at 30 mm and 40 mm, and a PIR thermal laminate at 37.5 mm and 52.5 mm. The other way is PIR board between battens with plasterboard over. Count the boards as the plasterboard guide on this site counts its sheets: by area, with an allowance for cuts.
The thickness comes from the design, and so does the answer on damp. A lining that is wrong for the wall can trap moisture in old brickwork, so take advice before fixing anything to a wall that has ever been damp.
PIR board for roofs and floors
PIR board is listed in eleven thicknesses from 25 mm to 150 mm, all 2400 x 1200 mm. It goes between and under the rafters of a loft room, and into the floor of a new kitchen extension. The thickness is set by the U-value in the design, not chosen at the counter, so order from the drawings.
Cavity batts for the extension
A new back extension is usually the only part of the house with a cavity wall. The lists have Superglass cavity batts at 100 mm and 150 mm and Knauf Earthwool batts at 50, 75 and 85 mm, with the coverage of a pack in each name. The batt has to match the cavity width on the drawings. There is also an acoustic roll at 100 mm, for partitions and floors where sound matters.
What can be done outside
Insulating a solid wall on the outside covers the brickwork, which changes the look of a terrace. On a street front that may need planning permission, and in a conservation area or on a listed building the limits are tighter still. Hither Green and Ladywell are in the London Borough of Lewisham, and Lee is split between Lewisham and the Royal Borough of Greenwich, so check with the council for the address before planning any work outside.
Getting it home and into the loft
Loft rolls are bulky but light, and they pass through a loft hatch. A 2400 x 1200 mm board does not, and it will not turn on many terrace staircases either, so plan where boards are to be cut. Say where the delivery can be put down, and mention any parking controls on the street. Keep boards flat and dry, and leave rolls in their wrapping until they are in the loft, since they expand when opened.
Rules of thumb
| Loft insulation | 270 mm of mineral wool: 100 mm between the joists and 170 mm across them. |
|---|---|
| Roll coverage | From the product names: 100 mm covers 12.12 square metres, 150 mm 7.71, 170 mm 6.73 and 200 mm 5.63. |
| Insulated plasterboard listed | Thermal Board at 30 mm and 40 mm, and PIR thermal laminate at 37.5 mm and 52.5 mm, all 2400 x 1200 mm. |
| PIR thickness | 25 mm to 150 mm are listed. The thickness for a rafter, wall or floor is set by the U-value in the design. |
| Cavity batts | Coverage per pack is in the name: 4.37 square metres at 100 mm and 3.28 at 150 mm for the Superglass batts. |
The shop has calculators that turn a measurement into a quantity.
On the shop today
The products this guide talks about, from the shop's Insulation aisle. Prices last checked .
-
Superglass Multi Roll 044 100mm (12.12 m2)
each
£39.00 inc VAT
£32.50 ex VAT
In the yard
-
Speedline Thermal Laminate 2400x1200x52.5mm PIR
each
£64.79 inc VAT
£53.99 ex VAT
In the yard
-
PIR Board 2400x1200x50mm
each
£32.39 inc VAT
£26.99 ex VAT
In the yard
-
PIR Board 2400x1200x100mm
each
£48.00 inc VAT
£40.00 ex VAT
In the yard
-
Superglass Cavity 036 100mm (4.37 m2)
each
£36.00 inc VAT
£30.00 ex VAT
In the yard
-
Superglass Multi Roll 044 150mm (7.71 m2)
each
£37.80 inc VAT
£31.50 ex VAT
In the yard
-
Speedline Thermal Laminate 2400x1200x37.5mm PIR
each
£57.59 inc VAT
£47.99 ex VAT
In the yard
Prices are the shop's prices today. Stock and ordering are on www.discountbm.co.uk.
Insulation and drylining delivered in Greenwich See all Insulation on the shop
Delivery to Greenwich
- SE3, SE9, SE12, SE13
-
Free when the goods reach £41.66 ex VAT (£49.99 inc VAT).
A smaller order pays the difference up to that amount: goods of £25.00 ex VAT (£30.00 inc VAT) pay £16.66 ex VAT (£19.99 inc VAT) for delivery.
- SE10
-
£25.00 ex VAT (£30.00 inc VAT) when the goods are under £100.00 ex VAT (£120.00 inc VAT).
Free when the goods reach £100.00 ex VAT (£120.00 inc VAT).
More guides for Greenwich
- Roofing supplies for Blackheath and Greenwich Breathable felt, batten, lead, a conservation roof window and gutters for a re-roof in Blackheath, Greenwich or Lee, with quantities.
- Plasterboard and plaster for Lewisham Board, plaster and bead quantities for lofts, extensions and re-skims in Lewisham, Hither Green, Ladywell and Lee, sent from the Northfleet yard.
- Bricks and cement for Eltham and Mottingham Counting bricks and matching inter-war brickwork for garden walls and extensions in Eltham, New Eltham and Mottingham: size, colour, bond and mortar.